3D Printed Contraception for HIV Patients Made with Carbon's CLIP Technique

Share this Article

A collaborative effort by researchers from the U.S. Centers for Disease Control (CDC) and University of North Carolina (UNC) Eshelman School of Pharmacy, including Isabella C. Young and Priya Srinivasan, has led to the creation of a novel 3D printed contraception device. This intravaginal ring, printed with Carbon’s vat photopolymerization 3D printing technology and silicone resin, has been designed specifically for women with HIV who often face limited contraception options. In the device, Etonogestrel (ENG), ethinyl estradiol (EE), and islatravir (ISL) were integrated into the silicone poly(urethane) IVR in a controlled single-step drug loading process driven by absorption.

Image courtesy of Biomaterials.

With a focus on empowering women to have control over their contraception, the researchers sought a design that would combine HIV prevention and contraception in one easy-to-use solution. They chose 3D printing as it could potentially offer better release kinetics, thus improving efficacy. Unlike traditional production methods, which use heat and pressure that can interfere with the drugs’ effectiveness in the ring, the team opted for 3D printing, selecting Carbon’s vat photopolymerization technology over material extrusion to avoid heat. This allowed them to use Carbon’s SIL30 material to craft a soft implant comfortable for use within the body. The innovation reflects not only a significant step forward in medical technology but also an earnest response to safer outcomes, especially concerning HIV prevention and women’s health.

I greatly commend the innovative effort to develop 3D printed drug loading devices, and I look forward to seeing more inventions that can be worn in and around the body. This path showcases a promising future for medical technology. However, I must express serious concerns regarding the long-term use of vat polymerization materials within the body.

The material known as SIL30 has approval for skin contact but not for prolonged internal use, such as spending half a year inside the body. Leaching of substances from vat polymerization implants into the body has been reported, including photoinitiators. The material itself contains compounds like 2,2′,2”-nitrilotriethanol, which is linked to reproductive issues and potential harm to unborn children. Additionally, SIL30 can cause skin allergies and contains Diethylene Glycol Monomethyl Ether Methacrylate (2-(2-methoxyethoxy)ethyl methacrylate), a substance that can be acutely toxic and irritate the skin.

While proper curing should eliminate toxicity and related issues, we must be exceedingly cautious with these materials, especially in cases of long-term exposure. We need to recognize that biocompatibility for skin contact is a different consideration than an implant designed to remain in the body for months. As we embrace this new frontier, it is paramount that we take extreme care to safeguard the future development and rollout of this technology over the coming decades.

In pursuing safer alternatives for internal use within the body, we might consider options like the low-temperature material extrusion of polycaprolactone, or perhaps await the creation of a new generation of resins. It’s vital to understand that just because something is labeled as biocompatible or safe for skin contact does not mean it’s suitable for all uses, at all times. We must keep this in mind both in experimental settings and as we plan to bring such materials to market.

The procedures to achieve fully cured parts are equally crucial in this context. While I don’t wish to single anyone out, I must express my skepticism towards the long-term use of any vat polymerization parts within the body. Our industry’s prosperity depends on ensuring the long-term safety of our products, and this must be our guiding principle as we innovate and grow.

Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.

Share this Article

Whose Binder Jet 3D Printing is Apple Using to Make Smartwatches?

Zeiss Licenses ORNL Tech to Inspect 3D Printed Parts

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns

I’ve said before that I’m very enthusiastic about 3D printed ceramics cooling systems. Now Simon Pavy and Entreautre have used Olivier van Herpt´s grounbreaking ceramics 3D Printing technology to make...

Oak Ridge National Laboratory (ORNL) is making waves with its groundbreaking entrepreneurship program, Innovation Crossroads. This program provides hard science entrepreneurs with access to ORNL’s facilities, personnel, financial support, and...

The Air Force Research Laboratory (AFRL) has awarded a contract to Phase3D, a Chicago-based startup specializing in in-situ monitoring (ISM) solutions for powder-based additive manufacturing (AM), to develop a quality...

The 2023 Paris Air Show saw GKN take yet another major step forward, with the third iteration of its directed energy deposition (DED) 3D printer. At the event, the British...

Upload your 3D Models and get them printed quickly and efficiently.

Site Sponsor

Events

Additive Manufacturing Strategies

Networking & Intelligence Summit, February 6-8, 2024

Jobs

3D Printing jobs around the world.

Subscribe to Our Email Newsletter

Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.

3D Printing Guides